What is the price of floor glue?

Speaking of the plastic sheet, we may not be very familiar with it. In fact, it is the PVC floor, as well as the names of floor leather and plastic flooring. It is used to paved the ground with stain resistance, elasticity, non-slip, wear resistance, environmental protection, and noise reduction. , Foot comfort, good decorative and other advantages. Speaking of plastic sheets, we may not be very familiar with them. In fact, it is PVC floor, as well as the name of floor leather and plastic floor. It is used to lay anti-fouling, elastic, non-slip, wear-resistant, environmentally friendly and noise-reducing floors. , The foot feels comfortable, and the decoration is good. What is the price of this floor glue? What should you pay attention to when choosing plastic sheets? let's see .


1. How much is the parity of floor glue?

What is the price of floor glue? 1:20-40 yuan

The cheapest floor glue is generally less than 2.0mm thick and 300-450mm in size. If it is made by some small factories, the thickness of the floor glue is 1.2mm, and its price may be less than 0 yuan/m2. This kind of floor has poor stain resistance and requires a lot of maintenance costs during use. Therefore, it is not suitable for use in public places such as enterprises, hospitals, and schools.

What is the price of floor glue? 2:40-60 yuan

The thickness of the floor glue at this price is generally 1.7-2.2mm, the thickness of the wear-resistant layer is 0.3-0.4mm, the wear resistance is high, and the wear resistance level is FM.

Floor glue 3: What is the price of 60-90 yuan?

The thickness of this type of floor glue is mostly around 3.0-4.0mm, and it is used for board floors between 500-600mm. The wear-resistant layer is 0.4-0.6mm, and the wear-resistant level is similar to the MPT-level floor.



Floor glue 4: What is the price of 90-120 yuan?

The price of floor glue is generally dominated by coil floors, and sheet floors are cheaper. Most of its thickness is between 3.0-4.0mm, and the wear-resistant layer is also between 0.6-0.7mm, and the wear resistance is very good.

Floor glue one parity 5: 120 yuan or more

For such high-priced floor glue, it is generally used on sports, medical, and commercial floors. The thickness is generally more than 4.0mm, and the price will vary depending on the place of use. The surface is added with natural rubber as a wear-resistant layer, so the price is relatively high.



2. What to pay attention to when sticking plywood

1. Measure the size first

First, the size of the room should be measured. This is important for applying floor glue to ensure accurate measurements. Then, the width of the cut should be slightly larger than the desired width, based on the measured structure dimensions. Grind the flowers and prune.



2. Do a good job of indoor work

Adhere the floor glue to make the indoor floor, first clean the floor, remove grease, dust, etc.; if the floor is flat, grasp the leveling, shovel and smooth the raised position, and fill in the depression. In order to ensure that the ground is flat, clean and dry, glue can be applied.

3. to do well

After opening the store, also pay attention to inspection. The inspection standard is the presence or absence of air bubbles. Air bubbles can be aspirated with a syringe and compacted. For the problem that the residual glue marks are difficult to remove after laying, it can be wiped with alcohol.